• FordSys Scan Free 1
  • FordSys Scan Free 2
  • FordSys Scan Free 3
  • FordSys Scan Free 4

FordSys Scan Free

The FordSys is fast and easy help you determine: Check Engine Light, Clears Codes, Read Trouble Code OEM Enhance module: PCM, ABS, RCM, TCM.
WARNING! China clones ELM327 v2.1 is only work with OBD2. If you have this adapter, please don't rate this application!Tested with OBDLink MX Bluetooth, ELM327 Clone Bluetooth V1.5, Vgate Bluetooth.
★ Key Features:
- Read OBD2 DTCs: Store DTCs, Pending DTCs, Permanent DTCs and Freeze Frame DTCs.
- Read and Erase: PCM OEM Enhance DTCs: PCM Continuous Memory , KOEO, and KOER.
- Read and Erase TCM OEM Enhance DTCs: TCM Continuous Memory , KOEO, and KOER.
- Read and Erase: ABS Trouble Codes, RCM Trouble Codes
- Clear DTCs:
• Clear all the current DTCs
• Clear I/M readiness
• Distance traveled while MIL is activated
• Number of warm-ups since DTCs cleared
• Distance traveled since DTCs cleared
• Engine run time while MIL is activated
• Engine run time since DTCs cleared.

★ Support:
- Hardware: OBDLink Bluetooth Farmily, KiWi Bluetooth Farmily, ELM327 Bluetooth Farmily (v1.5), Vgate Bluetooth Farmily, BAFX Bluetooth.
- Protocol: ISO-14229, ISO 15765, PWM SAE-J1850, ISO 9141.
- Vehicle:
• USA: All Ford and Ford Trucks since 1996
• MEXICO: All Ford and Ford Trucks since 1996
• EU-Gasoline: Ford Registered after 2001
• EU-Diesel: Ford Registered after 2004
• ASIA: Ford Registered after 2004

Category : Auto & Vehicles

Related searches

Reviews (30)

Dam. Jul 17, 2020     

App works great! But only gives you access to basic modules. If you want to read ALL the modules on your car and turn on-off hidden functions you need adapter with an HS\MS CAN switch + ForScan or ELMConfig software, only like that you can see all the modules. It was designed like that. App works great. If it doesn't, it's your OBD adapters fault. The app description tells what kind of modules you can read with this app, some people clearly can't read as app really works well. As advertised!

Ben. d. g. May 31, 2019     

When scanning for Abs, restraint or pcm it will get to 34% and then completely fail. If the engine is running then at 34% again the engine shuts off and won't restart until the app is closed. I thought I'd just found the perfect app too :(

Jes. W. Aug 25, 2019     

Would be great if it worked. Wanted to pull ABS codes on a 96 Explorer. App communicates with ABS module but shows no faults. That was the entire reason for installing this app, since its one of the few that will do ABS.

Kev. C. Sep 15, 2020     

The only thing this waste of data is capable of is linking and detecting what communication protocol is compatable. When trying to perform any function all I get is a "please waiting" message. I've "please waiting'd" for upwards of 30 minutes. Dont waste your time.

Tro. S. Oct 17, 2018     

This app reads one scan of live data and nothing more with Kobra Wi-Fi ELM 327 Interface. Beyond that, it cannot connect or display any other information. App installed on Galaxy J3.

Rob. B. Sep 6, 2020     

I don't have facebook.. so no response. Using a Samsung tab A, and OBDLink MX. 2020 Ford Edge. Car running, OBD2 works (not O2 sensor), PCM works, ABS goes to 85% then lost contact make sure Ing on. RCM same as ABS, TCM lost contact or not supported make sure Ing on.

A. G. u. Dec 5, 2018     

First, I use a TABLET in LANDSCAPE and this if it works at all is portrait only. So no matter what else might be good, I won't be using it because my mount only works in landscape

Maj. M. Nov 24, 2019     

Tried the app cause nothing else would connect to the f650 manufactured with a dodge motor. And this won't either. Kinda bad the Ford dedicated app won't connect to a ford vehicle.

Lef. M. Oct 11, 2018     

It's very good enjoying & it's halp a lot. If I my ask how to download full version. Even to code keys

Bil. F. Feb 16, 2019     

Not useable for serious work. Even with two alarms on it says no code found.

Ste. A. May 18, 2020     

Complete load of tosh, keeps dropping connection or freezes at 34%. Don't waste your time 😠

Ken. W. Sep 3, 2019     

Gave no more info than the free version even though the free version said there was more info on my failure code in the paud version. Waste of money.

A. G. u. Mar 28, 2019     

doesn't work,wase of time won't connect or stay connected.doubt the pay version will work if this one won't.

Joh. H. Nov 19, 2018     

I have used this for years in Windows . This app is a little more helpful and I don't have to deal with a bulky laptop.

Mik. M. Apr 18, 2021     

Can't get to all the sensors with this version, get the pro version.

Jer. S. Jul 15, 2020     

Awful - not stable, spelling errors everywhere. Don't bother

Ste. W. Sep 21, 2021     

Works great for reading codes, and checking values of sensors.

Jet. Apr 6, 2020     

It's a good app but it needs imperial units! Us older people don't do metric

Der. G. May 13, 2021     

Don't and can't connect to Bluetooth

Den. P. Aug 27, 2021     

Works as long as you have correct ELM adapter.

pau. g. Aug 7, 2020     

Live data does not now work since latest update

Jus. H. Aug 16, 2019     

1st bidirectional app that actually works.

Kei. H. Jan 11, 2019     

won't work with USB

Joh. W. May 1, 2019     

Love it! Saved me so much money!!

Lau. P. Mar 13, 2021     

Doesn't even connect to vehicle

Sha. T. Apr 13, 2019     

wont connect through elm327 intf.

dav. r. Oct 26, 2021     

Will not connect to bluedriver device

Vic. C. Jun 28, 2021     

I cannot connect it to my vehicle

Lui. A. Feb 21, 2020     

Works great scans my 2012 f150

Ste. W. Dec 8, 2017     

This app works better than my sct xcal 3 and my obd link app. I have been able to read close to dealer diagnostics with fordsys and my obd link mx2 reader. So 5 stars, hopefully this app will get into module diagnostics and more for Ford. Nobody can afford the 5,000.00 rotunda tool I used to use at the dealership when I worked there. So this does a good job for now.