• IP Cam Remote with Audio 1
  • IP Cam Remote with Audio 2
  • IP Cam Remote with Audio 3
  • IP Cam Remote with Audio 4

IP Cam Remote with Audio

IP Cam Remote is a mobile and a wearable application which allows you to connect to your IP cameras remotely from anywhere. Two types of IP Cameras are supported, MJPEG (e.g. Foscam FI8910W) and H.264 (e.g. Foscam FI9821W V2). You can use the virtual joystick to pan and tilt the camera. Up to 18 IP cameras can be added to the list in the drop-down list (spinner).
Two-way audio is supported (if your IP cameras support it). Press Speaker toggle button to ON to hear the audio. Press it again to turn the audio off.

Hold Mic button to activate the microphone. Speak to your Android device to send your voice to IP camera. Release the button to deactivate the microphone.

If you hold the Mic button while Speaker button is currently activated, the Speaker will be temporarily deactivated until the Mic button is released. This is to prevent or minimize echoes.

Connection Settings dialog, Notification Setting dialog, and Screen dialog can be invoked from Android's Context Menu.

Connection Settings dialog contains the required fields which you have to fill in before the application can connect to your IP camera remotely, assuming that IP camera has already been setup successfully in your home (or office) local network. If the Connection Settings dialog is already filled in for the currently selected slot in the drop-down camera list, the information can be removed by clicking the Clear button.

Notification Settings dialog allows you to turn the email notification on and off, assuming that your email accounts have already been specified in IP camera's administrative setup. The “Enable Android notification” (MJPEG cameras only) option allows a background service to be activated or deactivated on your Android device. The notification will be created and will appear in the status bar with the alert sound when your IP camera, i.e. the one selected in the main screen, detects movements even when the app is not running.

Screen/Control/Speaker Settings dialog allows you to flip the screen and the joystick control vertically and horizontally. This might be necessary in the case where your IP camera is physically mounted upside down. The "Keep Screen On" option tells your Android device to leave the screen on without going to sleep after a period of time. The “Keep Speaker On” (MJPEG cameras only) option keeps the speaker on even when this application is put in the background (e.g. when switching to another app, when Home button is pressed, or when the screen is off).

Screen brightness and contrast (only on some IP camera models) can be adjusted by tapping anywhere in the camera's display area to bring up the adjustment bars. Under the low light condition, IR On button can be pressed to turn on IR LED lights, to enable the night vision. Pressing IR Off button will turn off IR LED lights.

Spread your two fingers apart to zoom in or pinch two fingers together to zoom out. Press and hold the camera screen for a few seconds to reset the zoom level.

The user can navigate to "Real-time IP Camera Monitoring System" by selecting "Go to Monitoring System" from the context menu.

Android Wear app for IP Cam Remote has been introduced in version 6. This wearable app is installed automatically when you install or update IP Cam Remote. It allows the user to view and update screen shots of IP cameras right from his or her wrist. To refresh the screenshot, simply tap on the watch’s screen. Scroll up or down to navigate between IP cameras. Perform a long press to bring up camera list view which allows the user to quickly jump to a specific camera. The selected camera on the watch app can be opened on your handheld app by tapping on the “Open on phone” button. For more information, please access the Help page inside the watch app.

Version History:============v5.0:H.264 (HD) cameras are now supported!!!It has been tested with Foscam FI9821W V2.For H.264 cameras, the wide screen mode (16:9) can be selected from Screen/Control/Speaker Settings dialog.

Category : Tools

Related searches

Reviews (28)

Ric. M. Dec 17, 2016     

I eventually worked out that it needs the http port rather than rtsp or onvif, but then all I can get is a still. No ptz functionality. Using a vstarcam c33-x4. If there's something I can do to get this to work, please let me know!

Ash. M. Aug 29, 2016     

I just downloaded the app and was able to connect from the second try. First used my DynDNS URL but was not able to connect. Then I used the ip address and it connects right away. Will check the URL later and will give 5 stars if it works. Haven't checked the audio yet. So far this was the only app I got that can control the camera movement and settings. I have tried 5 others before: or nothing or the picture only.

Dan. P. Sep 27, 2016     

I've had this app for years. Every time I switch phones, or my phone updates, there's a new issue with the app. Some get solved, others just annoy me daily. I have to force stop the app daily because it isn't responding or the speaker takes over a minute to come on, if it comes on at all. The app is ok but it requires patience.

A. G. u. Apr 27, 2016     

The only issue I have is that the audio is loud or soft randomly for no apparent reason. Sometimes I open the app and it's super quiet, sometimes it's nice and loud. There's no rhyme or reason to it. Also, even though I have it set to keep on audio when leaving the app, it cuts off quite frequently....meaning I have to constantly turn on the screen just to hear audio. I have several 'background audio' apps, and this is the only one that doesn't work.

Ken. Nov 11, 2015     

Works perfect on my Samsung S5 but on my Samsung Tab 3 I made a mistake on the ip address it could not find the camera but did find my other camera no problem. I try and change my mistake but no icon for the content menu. I have looked and pushed ever icon I can find but no success. Some help would be greatly appreciated. There is no icon for the context menu you mention.

Tim. C. Nov 22, 2015     

Foscam had a first party app and they completely broke it. I looked for alternatives and found dozens of apps with different names that was the same exact app (scam). Then I found this. This app is fantastic. It does everything I want, has unintrusive ads plus a premium option. THANK YOU.

Jam. G. Aug 23, 2015     

I've used this app for my Foscam for a few months now, it is simple and easy to use and set up. Keep in mind that "buggy" and "in a place with a low wi-fi signal" are 2 different things. Low signals make the controls jumpy, just the nature of the beast. My only complaint is the audio lag. It increases over time and is easily reset by toggling speaker on and off, but overnight can be off by about 10 seconds. Love seeing the camera feed on my watch!

Jos. S. Feb 12, 2016     

This app is phenomenal! I have some Foscam FI9821 V2 cameras, and I've tried a bunch of different apps before I finally found this one. This app was extremely easy to setup, and the connection the the camera was fast and responsive, even on a slower network like a 3G network. The user interface is clean and intuitive. I really like the virtual joystick for controlling pan/tilt, none of other apps I tried have that nifty feature. This is app is so awesome and easy to use that made the in-app purchase to get rid of the ads, and support the developer, within 10 minutes of setting up all my cameras. Totally worth $3. Thank you, SoratSoft, for making such a fantastic app.

Eve. R. Dec 31, 2017     

If it's stable will be a great app of all. I tried many similar apps none of them works only this one can connect to my cameras from different makers. Only issue is it freezes and no response randomly. Otherwise this app is the best.

Nic. M. Jun 4, 2017     

I have 5 cameras. 1 Winbook from micro center and 4 kaicong. Audio works with the micro center branded one but not the kaicong. Pan and tilt works great on the 4 kaicong cams that have this feature. Patrolling does not work on the kaicong cameras either. I would pay for it if I could use all the features with all my cams. This app needs an update. Issues with android 7.0. Freezes upon opening and have to wait to use pan/tilt or switching cameras for about a minute. Some force closes as well.

Emm. L. May 8, 2016     

Worked great with my older foscams. Doesn't work with new HD cameras. Moved onto other IP cam app that work with HD cameras no problem.

Te. B. Apr 19, 2017     

Apparently constantly freezes. Other than that it has the features of a top app. Please fix and I will upgrade the rating. Currently using another app

Ste. L. Oct 16, 2017     

Zero response from support how to add second camera/additional settings for both on and off home network. Pretty useless when I have to change settings each time to see camera depending if I'm on home WiFi or not... gotta be better apps out there!!

Jia. G. Dec 11, 2015     

Tring to set it up but dont know where to find the port number (required for connection setting) of the camera. I am using it with wireless connection

Dur. D. Jan 17, 2016     

Sometimes works and sometimes doesn't work at all.. it works everywhere else but not on this app for some reason. Horrible app.. very unreliable.

Ume. K. Jan 8, 2018     

Gone from 4 stars to 1 to get developers attention. App frequently crashes or stop responding. Controls are laggy. Pixel 2 XL.

Ter. M. Apr 29, 2017     

Great app, been using it for years. However, its in desperate need for Android 7.0 (Nougat) support. App lags, freezes and the camera moving joystick becomes unresponsive when being run on 7.0. Please fix soon & I'll gladly switch to a 5* review.

Jos. Z. Jan 25, 2016     

I hope it gets fix soon so I don't have to find a new app.

A. G. u. Apr 2, 2016     

Works fine in single cam view but crashes when you go to 4 cam split screen view.

Dav. Jun 4, 2017     

Tried 20 apps since Foscam broke (and removed audio) from there official apps update: on Nexus 6p it crashes often

A. G. u. Nov 10, 2016     

Good; however, small problem. After using mic to speak to someone then terminating the app, microphone for Google won't work. Requires phone restart. More noticeable indicator for speaker and mic would be nice enhancement, too.

Mon. D. Feb 18, 2017     

It use to be a decent app, but now, it's junk. Works when it wants to work, takes forever for the sound and mic to engage, if at all. When trying to scan area, it just freezes.

Nik. h. Sep 10, 2016     

I put my ip in, no port number. I put in 80 & it wont even connect. Sad

Fra. C. Jan 18, 2017     

In description it says view camera's from anywhere. Doesn't work outside my house. I need it for when I'm away

Jer. K. Jul 9, 2016     

When I go into multi camera view it keeps crashing. Using Samsung 6S

JC. Oct 30, 2015     

Controls for app seem to stick/hang on Marshmallow 6.0 (Nexus 6p). App keeps freezing and prompts show up to shut down hanging app. Please check. Thanks.

Mat. R. Oct 16, 2016     

After trying many apps. This one fully works with my vstarcam F series. Both the audio and motion work perfectly

Ton. T. Aug 26, 2015     

With the new feature for smart watches this app just blew my mind. So cool I can see my IP cameras from my watch!