Arduino Bluetooth Remote/Controller + Projects
Thanks for downloading our application !
This applications contains the controllers that connect via Bluetooth and also some Arduino Projects that we made for you to experiment.
The commands that are sent to the device can be customised by each and every one of you !
The app works with all types of Arduino boards ! Give it a try !
This Arduino Bluetooth Controller app contains 4 types of controllers :
- Car Controller
- LED Controller
- Terminal Controller
- Buttons
NOTE1: Each type of controller has it’s own type of projects , some of them have all projects listed. In order to access the Projects page , either swipe from left to right in the first Application screen or connect to your bluetooth device , select a type of controller and then tap the three dots at the top right corner of your chosen controller type.
NOTE2: If you fail to connect to your device there is NO problem ! Each controller has at the top right three dots , and if you tap them you can press reconnect and you are ready to go !
There is also a disconnect button in case you need to use it.
Steps necessary in order to connect to your Arduino Device : (they are also listed in the images of the app from above)
- Turn on your Arduino Device and open then this Application
- Turn on Bluetooth on your Phone/Table by tapping the first button from the top
- Press the “Scan for new devices” button and wait until your device shows up in the white square that appeared
- Press the checkbox from the right side of the device you want to connect to
- Press the “Connect to selected device” button and wait until you are connected
Once you connected to you device you got 4 options of controllers :
1. Car Controller:
It is a great type of controller if you have an Arduino Car !
You can take the code to upload on your Arduino device by tapping the three dots at the right top side.
Also if you want to modify the commands that are sent to the car , you can do that also by tapping the three dots. and choosing , for example you want your car to change gears by pressing the buttons from the left side.
2. LED Controller:
This controller is a very simple one : it turns on and off a LED by sending a command to the Arduino board.
You can customise the command that are sent by the button by pressing the three dots from the top right corner.
3. Terminal Controller:
This type of controller is good for anything !
You can send command to your Arduino device by writing each command at the bottom of the screen and then it. will appear in the above area.
4. Buttons:
Like terminal this is also good for anything !
You can customise each button by tapping the dots at top right corner .
For any suggestions and bug reports send an email at [email protected] .
We will be uploading more projects for Arduino soon ! Stay Tuned !
Enjoy the app! :)
This applications contains the controllers that connect via Bluetooth and also some Arduino Projects that we made for you to experiment.
The commands that are sent to the device can be customised by each and every one of you !
The app works with all types of Arduino boards ! Give it a try !
This Arduino Bluetooth Controller app contains 4 types of controllers :
- Car Controller
- LED Controller
- Terminal Controller
- Buttons
NOTE1: Each type of controller has it’s own type of projects , some of them have all projects listed. In order to access the Projects page , either swipe from left to right in the first Application screen or connect to your bluetooth device , select a type of controller and then tap the three dots at the top right corner of your chosen controller type.
NOTE2: If you fail to connect to your device there is NO problem ! Each controller has at the top right three dots , and if you tap them you can press reconnect and you are ready to go !
There is also a disconnect button in case you need to use it.
Steps necessary in order to connect to your Arduino Device : (they are also listed in the images of the app from above)
- Turn on your Arduino Device and open then this Application
- Turn on Bluetooth on your Phone/Table by tapping the first button from the top
- Press the “Scan for new devices” button and wait until your device shows up in the white square that appeared
- Press the checkbox from the right side of the device you want to connect to
- Press the “Connect to selected device” button and wait until you are connected
Once you connected to you device you got 4 options of controllers :
1. Car Controller:
It is a great type of controller if you have an Arduino Car !
You can take the code to upload on your Arduino device by tapping the three dots at the right top side.
Also if you want to modify the commands that are sent to the car , you can do that also by tapping the three dots. and choosing , for example you want your car to change gears by pressing the buttons from the left side.
2. LED Controller:
This controller is a very simple one : it turns on and off a LED by sending a command to the Arduino board.
You can customise the command that are sent by the button by pressing the three dots from the top right corner.
3. Terminal Controller:
This type of controller is good for anything !
You can send command to your Arduino device by writing each command at the bottom of the screen and then it. will appear in the above area.
4. Buttons:
Like terminal this is also good for anything !
You can customise each button by tapping the dots at top right corner .
For any suggestions and bug reports send an email at [email protected] .
We will be uploading more projects for Arduino soon ! Stay Tuned !
Enjoy the app! :)
Category : Tools
Related searches