Bilan HVAC Simple

Application designed to assist the Engineer on site and in the office. All-In-One
- ventilation, heating, potable water.SIMPLE version is intended only for private use
- NON-COMMERCIAL !!!COMMERCIAL version available at Bilan HVAC for Tablets Version for mobile available at Bilan HVAC Simple NOTE:The application can run on older configurations to several seconds !!! Please calmly wait!Differences between the SIMPLE and the standard version at the bottom of the page.Basic features: Tab VENTILATION
* STREAMS
- For a given dimension of the flow duct selection depending on the speed or noise. The term for this channel:
- Air flow resistance,
- Speed,
- Noise,
- Selection of the size of the duct so as not to exceed the speed condition
- only Standard,
- Selection of the size of the duct so as not to exceed the noise condition
- only Standard,
* CHANGE OF CONTROL (only PRO). The full calculation of the change of ventilation, endearing:
- The power of the heater,
- The power of the radiator overt,
- Latent cooling power,
- Moisture condensation,
- The required power-heater.
* INSULATION
- only PRO. Determination of heat loss and temperature drop in the duct
* SMART (only Standard)
- Hydraulics calculations carried out in a simplified way. HEATING
* Hydraulics:
- Conversion under a stream of liquid to various media.
- Finishing panels pipe diameters based on the criterion of speed or pressure.
* Finishing panels regulating valve on the basis of the authority or the required resistance.
* Calculations of heat loss through the insulation
- only Standard.
* Sizing WTP, and the translation of hardness.
* Calculations surface and pipe capacity
- only Standard. WATER
* Hydraulics system.
* Devices and fire hydrants.
* Pipe insulation
- only Standard.
* Expansion vessel.
* Calculations hot tap water tank and the heat-up.Tab CONVERIONS Tab ACOUSTICS
- only the PRO The conversion of acoustic noise dB per dB (A) and NR curves. Tab UNITS Exchange units:
- length,
- mass,
- flow,
- pressure,
- energy.In SIMPLE
- only number "1", with 2 decimal placeIn addition, version Standard with respect to Simple is characterized by:
- The possibility to use commercial
- The lack of an Internet connection,
- Remembering user settings
- Automatic change of scale for ANY application after starting,
- The lack of advertising, VENTILATION
- The choice duct size as not to exceed the speed condition,
- The choice duct size as not to exceed the noise condition,
- Smart tab, HEATING
- Selecting any of the pipe.
- Pipe material
- in addition:
* HDPE SDR 17
* PERT-Alu-PERT
* PEX
* Crimp systems (steel / stainless steel / copper)
* Stainless high
- Change roughness.
- Additional Factors
- glycols,
- Calculation of pipe insulation. CONVERSION
- Translating for any input,
- Conversion of any number to the nearest 6th decimal place.Version Pro with respect to Standard is characterized by: VENTILATION
- Transformation IX central.
- Calculation of the duct insulation.
- Calculations and acoustic conversion. HEATING
- Any agent.
- Any diameter.
- Additional fluids
- thermal oils.
If you want to translate the program into your own language
- write to me. The PRO version for free!