iNav SmartPort telemetry viewer and logger
Hardware is required to connect! You additionally need to connect signal inverter to taranis R9M smart port and then connect bluetooth module to it. Bluetooth module should be configured to work at 57600 baud rate.
This application is open sourced. You can view source and report any issues at https://github.com/CrazyDude1994/android-taranis-smartport-telemetry
Category : Tools
Reviews (21)
Works great, I am getting ExpressLRS telemetry through Arduplane firmware, back to my transmitter and onto my phone. Thanks. Would be good to choose additional telemetry items to display.
I think this is going to be good? Does this only work with iNAV? I have a smart port GPS on my plane that is sending telemetry back via smart port through a R9M Stab Frsky receiver. I can see the telemetry data on my Taranis, but not on my app. Can you use the bluetooth and Mavlink data being transmitter by the full size crossfire module? Thank.
Still not working with TBS Crossfire. I have FULL TX Module and only get battery % and Sat count. I do get a map view of where my quad is or plane but no distance to home point or Alt and Speed. I updated to latest XF 6.0.7 and it's even worse on latest XF firmware because it only shows say count and that's it. Frsky R9M still seems to work ok.
Hi, I've managed to connect and view telemetry data briefly. But it keeps disconnecting. Any idea why? I have a Jumper T16 Pro with an internal Horus Bluetooth module. Thanks!
Great APP. Would be super helpful if there are rssi readings and voice notification since some users are using the r9m with non-open tx radios or in ppm mode.
Cool app. I wonder if you could add waypoint upload capability. So the user costumable waypoint could be overlayed on the map.
Works great with a Taranis X9D OG from 2014 running OpenTx 2.3.10, an external XJT module flashed with 2.1.0 using the S.Port on the module, and Betaflight 4.2.5 to a R-XSR on 2.1.0 on F.Port. Would give 6 stars if the app supported imperial values instead of just metric for us Americans...
This is an GREAT app just started using it. The only problem I see to be having is I can't get the Speed to show any readings.
It would be nice if it had a software inverter so we didn't needed a hardware inverter. Perhapps the built in Bluetooth in Horus could work out of the box then?
Excellent piece of work , works great ! Just one question is this compatible with Ardupilot too ?
Works well with the Frsky XLitePro. Hope there would be an app for Betaflight
Good app, would be nice if there was integrated flight radar24 air traffic.
Very good app, will that work with f.port between fc an rx (r9...)?
Great app! BLE module is working as expected!
dont try yet if it support offline map or you have to be on 4g to show the map
Does this work with rc mavlink over wifi from tbs tango2?
It does not work.
I'm FrSky R9M user, for the artificial horizon to work you have to "set frsky_pitch_roll = ON" in inav CLI command
Must have for inav
Its works
Very good - simple and functional. Would be nice to be able to overlay more telemetry values on the screen, particularly in landscape / tablet mode. It would be great to have a similar overlay as the iNav LUA script for Horus colour screens where you have a full pitch/roll and artificial horizon display etc. Also would like to see support for Horus integrated Bluetooth at some stage.