LSIS Drive Sim

※ Introduction
- ‘LSIS Drive Sim’ provides users to change the setting and shows the result and status of the motor how it reacts.
- Users can receive full support by e-mailing service and benefit from immediate feedback from LSIS.※ Supported functions Only drive functions listed below are currently implemented in this version.1. Basic Tasks
- Frequency reference source configuration for the keypad
- Motor operation display options
- Multi-step speed (frequency) configuration
- Command source configuration for keypad buttons
- Command source configuration for terminal block inputs
- Local/remote switching via the [ESC] key
- Motor rotation control
- Automatic start-up at power-on
- Automatic restart after reset of a fault trip condition
- Acc/Dec time configuration based on the Max. Frequency
- Acc/Dec time configuration based on the frequency reference
- Multi-stage Acc/Dec time configuration using the multi-function terminal
- Acc/Dec time transition speed (frequency) configuration
- Acc/Dec pattern configuration
- Acc/Dec stop command
- Linear V/F pattern operation
- Manual torque boost
- Automatic torque boost
- Accelerating start
- Deceleration stop
- Stopping by DC braking
- Free-run stop
- Power braking
- Start/maximum frequency configuration
- Upper/lower frequency limit configuration
- Frequency jump2. Advanced Tasks
- Jog operation
- Up-down operation
- 3-wire operation
- Safety operation mode
- Dwell operation
- Slip compensation
- Auto-tuning
- Sensorless vector control
- Auto restart operation ※ Introduction
- 'LSIS Drive Sim' provides users to change the setting and shows the result and status of the motor how it reacts.
- Users can receive full support by e-mailing service and benefit from immediate feedback from LSIS.※ Supported functions Only drive functions listed below are currently implemented in this version.1. Basic Tasks 
- Frequency reference source configuration for the keypad 
- Motor operation display options 
- Multi-step speed (frequency) configuration 
- Command source configuration for keypad buttons 
- Command source configuration for terminal block inputs 
- Local / remote switching via the [ESC] key 
- Motor rotation control 
- Automatic start-up at power-on 
- Automatic restart after reset of a fault trip condition 
- Acc / Dec time configuration based on the Max. Frequency 
- Acc / Dec time configuration based on the frequency reference 
- Multi-stage Acc / Dec time configuration using the multi-function terminal 
- Acc / Dec time transition speed (frequency) configuration 
- Acc / Dec pattern configuration 
- Acc / Dec stop command 
- Linear V / F pattern operation 
- Manual torque boost 
- Automatic torque boost 
- Accelerating start 
- Deceleration stop 
- Stopping by DC braking 
- Free-run stop 
- Power braking 
- Start / maximum frequency configuration 
- Upper / lower frequency limit configuration 
- Frequency jump2. Advanced Tasks 
- Jog operation 
- Up-down operation 
- 3-wire operation 
- Safety operation mode 
- Dwell operation 
- Slip compensation 
- Auto-tuning 
- Sensorless vector control 
- Auto restart operation
※ Supported functions Only drive functions listed below are currently implemented in this version.

1. Basic Tasks
- Frequency reference source configuration for the keypad
- Motor operation display options
- Multi-step speed (frequency) configuration
- Command source configuration for keypad buttons
- Command source configuration for terminal block inputs
- Local/remote switching via the [ESC] key
- Motor rotation control
- Automatic start-up at power-on
- Automatic restart after reset of a fault trip condition
- Acc/Dec time configuration based on the Max. Frequency
- Acc/Dec time configuration based on the frequency reference
- Multi-stage Acc/Dec time configuration using the multi-function terminal
- Acc/Dec time transition speed (frequency) configuration
- Acc/Dec pattern configuration
- Acc/Dec stop command
- Linear V/F pattern operation
- Manual torque boost
- Automatic torque boost
- Accelerating start
- Deceleration stop
- Stopping by DC braking
- Free-run stop
- Power braking
- Start/maximum frequency configuration
- Upper/lower frequency limit configuration
- Frequency jump

2. Advanced Tasks
- Jog operation
- Up-down operation
- 3-wire operation
- Safety operation mode
- Dwell operation
- Slip compensation
- Auto-tuning
- Sensorless vector control
- Auto restart operation

※ Supported functions Only drive functions listed below are currently implemented in this version.

1. Basic Tasks 
- Frequency reference source configuration for the keypad 
- Motor operation display options 
- Multi-step speed (frequency) configuration 
- Command source configuration for keypad buttons 
- Command source configuration for terminal block inputs 
- Local / remote switching via the [ESC] key 
- Motor rotation control 
- Automatic start-up at power-on 
- Automatic restart after reset