Category : Tools
This app works well on my M35 Stagea. It would be great if there were some more parameters available like realtime fuel consumption or air/fuel ratio but I don't know if that's technically possible. I really do appreciate the time and effort gone into providing this app for free. Thank you!
ini failed, ini failed, ini failed. 03 G35 6MT coupe with ELM 1.5 adapter, one purchased specifically from the list of compatible adapters on their website. Glad I tested it before I put out for the paid version!
Ini failed, tried 3 of the recommended adapters and 3 different android devices, nexus 7 on 4.4, firehd10 2021 and a pixel 3a on latest android, all show ini failed.
Too many unexplained ini status failed errors. Sometimes it connect then sometimes it doesn't. Frustrating
this thing just does not work. constant disconnects. and the data was incorrect when it did. not happy
Really want this to work to buy the full version: Always getting Status: ini failed. I have an Elm v1.5 bluetooth adaptor. Help?
Can not for the life of me to get the app to connect to the adapter on my s10...same adapter works with my old phone.
It connected to my OBD scanner and was very fast with the data. Very amazed and grateful.
It is indeed a 'lite' app. Reads and clears fault codes and that's all.
Cannot connect to ECU. Status: Failed INI. Useless.
Not only is the Nissan 350 and 370 bad as but the VQ crushes others. The app is bad as just what I needed
Used it several times on my 2000 qg18de engine. Helped a lot
Useless for wifi adapters
Working well for viewing and resetting faults on 2004-2005 Nissan Serena C24 QR20DE with ELM 327 Bluetooth
?Will it work with otg obd vagcom k can cable instead of elm Bluetooth?
Will not connect to xtrail yd 2.2
Nissan note 1.4 benzin. Nőt connecting. Elm327
works with elm327 v1.5 on nissan QG18 engine
Awesome! My 2005 pathfinder had the idle issue after cleaning the throttle body and doing the manual pedal depress and on/off ignition method did not work. I was about to take to the dealer so they can do it for me at a price between $130 to $200. t had a bluetooth OBO adpator around and gave this app a try. It connected right up went to the idle clear and idle relearn section and tap tap tap. Car is idling at 650 rpm from the 1200 rpm originally. Thank you buddy.
I was able to connect NDSII Lite with my adapter. I purchased NDSII and couldn't connect to my adapter. I am getting error "Unable to connect"
I was getting the infamous P0507 (high idle) error on my 350z after installing a Kinetix V+ plenum and cleaning the throttle body while I was at it. I had done the pedal dance several times and had success but it wasn't sticking after a restart. I eventually stumbled across this app after a few hours of Googling the issue and seeing people mentioning NDS2. I plugged in my cheap bluetooth OBD2 adapter (shows as CHX when pairing) and had no problems connecting to my adapter. I let my car idle until the temp gauge looked to be at operating temp, cleared self learn to be safe, then hit 'idle air volume learn' and it immediately dropped my RPMs. So much so I thought it was going to stall but I gave it a minute to sort itself and everything was fixed and I cleared the error code! My Z runs great again and after a half dozen restarts I haven't seen the error again!!!
works perfectly. make sure u are using a legit elm327 v1.5 adaptor. Able to read my fault codes and clear the errors on my 2005 T30 xtrail (QR25DE).
Yes!!! I was having idle problems with my Nissan SE-R. Idle was always a little high and the throttle was floating way high between shifts, which made driving smoothly impossible. I tried the pedal dance technique to do the idle air relearn but I couldn't get it to work despite about 50 tries. I thought I was going to have to take the car to a dealer so they could fix it through the OBD port, then I thought well if they can do it through the OBD port maybe I can too... I found this app and tried it- it worked on the first try! I got an error message saying that it failed, but it did not fail- my idle is perfect now. Thank you!
Worked as advertised. It reset my idle after cleaning the throttle body. Brought it down to 600rpm from 1600. Although the relearn function said it failed, after turning the engine on the idle dropped right down. Great easy fix.
Full of Adverts. Doesn't read any useful info from Nissan ECU.
Can not connect. Ini failed. Using elm 327 v1.5. Viecar obdII. Will try another adapter. Shame. PC version really good.
Well , this app is a waste of time . I have tried with 1.5 OBS and it was not connecting at all . Ini failed ini failed. It's curious cuz my devices are working with Torque Pro and many other . Garbage!
Won't detect vgate iCar2, the other ELM scan tools on google play work fine with it. Also the app does not appear to nearly have the features NDSII for desktop has, I want to initiate idle and throttle body re-learn.