NDSIII Lite
This application supports both, petrol and diesel cars. It communicates with the engine ECU using Consult III protocol. It uses the same communication protocol as the dealer diagnostic tool. This protocol is far more comprehensive than the generic ISO15765 protocol.
The current version of the app has following functions:• Data Display with data logging• Self Diagnostics• Work Support with Clear Self Learn, Idle Air Volume Learn, Exhaust Valve T/C Learn and M/T Neutral Position Learn functions• Dash Display with customisable gauges• Video Recorder –video recording disabled in Lite version
A Bluetooth diagnostic adapter is required to connect to the car. This app is design to work with adapters build on the popular ELM327 chip. They are very well priced and available from many Internet suppliers or eBay. For a list of tested adapters please visit our website.
NOTE: There are a number of adaptors from China with fake ELM327 v2.1 chip. Those adaptors do not have all required commands and are not supported. Look for adaptors with v1.5 or v1.4 chip.
If you would like an application without advertising purchase the full version also available from Google Play store.
Category : Tools
Reviews (19)
Had high hopes to install full version but this is all over the place. Doesn't support diesel. Fuel Temp is actually Accelerator pedal Pos. Air Temp shows 140deg. Cls Throttle doesn't change. And unfortunately still no Windows version!
Tested on Nissan NV200, 2.0 petrol, 2015. It just works. I am thinking to buy the full version.
The only App can read my infiniti Q50. The others failed.
Lifesaver. Was able to perform idle learning flawlessly after throttle body cleaning. 08 g35x. Thanks
Able to do the relearn on my 07 Infiniti G35. Saved me a lot of trouble!
thank you for making this app .. i am just waiting for the adapter (ELM327 Bluetooth OBD2) to arrive from amazon to try the app. but will this app work with my 350GT V37 (INFINITI Q50) ? i live in the middle east and i assume our cars here use the same protocol as the JDM Nissan cars "Consult III protocol" ?? is this right? guide me please.
Didn't work in a Qashqai J11 2015. Stuck at "Ini failed"
I love you guys I did the idle relearn in my 2009 altima hybrid it worked perfect thank you
Life saver!!! Needed idle relearn for 2007 Altima after throttle body cleaning. Tried the relearn steps over 20 times, didn't work. Found this app, tried with a cheap elm327 2.1 OBD adaptor, didn't work. Bought a "veepeak" Bluetooth adaptor (Canada), worked like a charm. Just plugged it in after driving from work, connected it, idle relearn button and happily ever after. :) Will definitely buy the full version
For Lite version , There is a water temp on DATA DISPLAY tap but not on "DASH" tap (temp is n/a) . I have no idea why and do not know if buying full version will fix it or not. **I connect it with v1.5 scaner to my 2009 nissan teana (altima) j32. My device is LG G2** Please answer. Thank you
Bought the OBD adapter recommended by NDS. Connects but "Get Params failed" error . Adapter works fine in Torque.
Used with BAFX Products 34t5 (bought from Amazon). Had to perform an Idle Relearn after cleaning out the Throttle Body. Got NDS3 lite, and couldn't get the idle relearn to perform on an 07 Infiniti G35 Sport at first. Turn the vehicle off, performed the Accelerator relearn, then the Throttle Body check. Then cleared the Self Relearn before driving, drove the vehicle for 15mins. Got the vehicle within recommended parameters, performed the Idle Relearn, and it finally worked!!! Saved a trip to the dealer!!!
Connects to the adaptor, but doesn't display any data. Status says "set diag session failed". Unusable. (the adaptor works fine with torque).
I have a elm327 but I didn't connect with nissan car. Can you tell me how I connect with nissan car.
App crashes on startup
was hopefull about this app tried 2 devices 2 adaptors with same result, RPM at idle reads 95460
Adapter had to be reset each time. Works fine with torque.
Great app saved me time and money
Worked on my Nissan Almera. No other app can give me this much info about my car. Not even Torque! I used Ancel ELM327 V1.5 Bluetooth adapter and it worked flawlessly. Didn't work on my V2.1 adapter as expected. Will definitely buy the non-Lite version.