TENVIS Sight
SUPPORTED CAMERAS
--------------------------------
I have tested this app with genuine Tenivs Mini319w and JPT3815/JPT3815W Pan-Tilt camera and a genuine Tenvis IP601W/391W outdoor camera, but it should also work with camera models like Tenvis JPT3812/3W, PT7131/2W and FD4203/4
Note:
3G or wireless network connection required, for use outside your home network you'll need to setup portforwarding on your router
Category : Business
Reviews (30)
has not been able to work with newer versions of android because the developer has not updated it in a while but i think that this app could be a good one if it was updated
This app actually works. its the third tenvis app I tried, and this one finally found my camera.
Can not find any of my Tenvis cameras, auto or manually.
Wont work on Auto search or manual.
Useless. Cannot find any Tenvis cameras. Wish I'd never bought Tenvis
If I could give it less than 1 star I would.
dnt work on my computer
I'm trying to to use it with IPRobot3 FW Ver : 1.3.3.3. While i can connect successfully to the camera stream using web browsers and Tenvis P2P android app both locally and remotely (using DDNS) this app refuses to work with any settings locally or remotely on my samsung galaxy note 2 with OS 4.3. Please make it work..the interface is great
Funny how this camera flawlessly controls the TENVIS JPT3815W over the internet but the actual TENVIS app that the company tells you to download will NOT even connect unless you're on wi-fi. The only major problem with this app is that the audio does not work. I can talk THROUGH the camera just fine, but you can't hear what's going on in the room. Fix the audio and you've got a winner.
This app does what it says, it works great with my tenvis camera. Like others have said it does run in the background though, so make sure to completely exit out by pressing back on the main screen or kill the app when you're not using it. My phone would get very hot and the battery would drain quickly if I don't exit out of the app. Another flaw is that in landscape mode the video feed is shrunken down to the point that you basically need a magnifying glass, while the PZT controls take up much of the screen. Please fix this and 5 stars.
IPRobot3 cameras have their own subnet (Eg. 172.16.0.0/24). When an android device tries to connect from an adjacent subnet (Eg. 172.16.1.0/24), this Tenvis app cannot connect. The same android device running IP Cam Viewer works just fine, although the IPRobot3 reboots when using audio but that's a different problem. Tried rebooting cameras/android devices/routers/APs - somehow they've just broken this app so that you are forced to run cameras on the same LAN subnet as the android device.
This app has worked well over WiFi and 4G networks but it burned through 1.5 GB of data in a few short days. Need to use the 'exit' button on the menu which is not obvious. App should stop chewing data when it is in the background.
App works well both on wifi and 3g, but be careful as it ate my whole gb of data in about 4 hours. On my phone (Sony Xperia Z1) and my son's (Samsung s3) it continues to run in the background when you have come out of the app and think it is closed. You need to make sure the app is properly closed in the task manager every time you use it. Would have scored 5 stars if not for this issue.
Will not find my iprobot3. But many other apps on here will do with no problems. Bit of a let down
Easy to use app wich connects to my tenvis cam. Would be 5 star if you could set the alarm sensitivity or if it didn't reset the current sensitivity.
Keeps rebooting my device when I access the app on my phone. When you use the Mic it crashes every time.
Great app, quick and easy to set up with the TENVIS IP camera i bought. The only issue is that the app stays active when not in use and this can use loads of data. Be great if is switched off.
Works fine connected to the home Wifi but won't work on mobile network. Bit pointless.
I like the cameras but their own app doesn't connect to their own IPROBOT. Third part app worked. Poor effort.
If each cam is configured. Home viewing is relatively easy. For viewing by Internet need to do port forwarding. Work with other cam like easyn if it used same protocol.
Interface looks great and it found my camera straight away but unfortunately settings page insists my username and/or password is invalid and so will not log me in to view my camera feed. I am sure I will rate it much higher if this is fixed.
Poor half the time tenvis cam goes offline. Really annoying app have to then reboot cam online
Couldn't connect in the 1st with the user admin. but after creating a user via the web-interface it worked perfectly.
Easy to setup but I can't add a 2nd access? i.e. one for private ip & one for public ip to the same camera (I use fixed public ip). Still trying. Desparately needs at least VERTICAL flip for inverted/ceiling mounted camera. GT-N7000
Doesn't follow google app guidelines at all, they didn't even change the description to say android. Also it doesn't keep the screen awake when viewing the camera. Poor execution.
The app wont let me view the camera feed on my tab 8 but works fine on my galaxy S4 phone ... please help ...
Forget tenvis stuff go somewhere else, tenvis servers are down more often than they work hence you cant always access your camera, and poor technical support on forum
Will not work on my Nexus 7 although both on same router.. Keeps saying camera not connected but I can connect to the camera with my Samsung phone and my desktop
Only works at home on Wifi network. Consumes far too much data since it continues to run in the background.
Honestly, this app is frustrating to use, even after using a ethernet cable to connect my camera to a network, there we connection issues that didn't display anything on the app and the images used to showcase the app are nowhere close to what the app actually looks like