Trimble DL
The Trimble DL application is a simple tool to perform a Fast-Static or Static GNSS Survey, manage data files on the receiver and email raw data files to the office.
The Trimble DL application allows you to enter the station information of the point surveyed, along with the GNSS antenna information. Once the station information is entered, tap the Measure Point button to start logging GNSS raw data files to the receiver memory. You can use the application to view all logged raw data files stored on the receiver. You can email the raw data files to your office directly from the Android device.
The following Trimble GNSS receivers are supported by the Trimble DL application, using the most current GNSS firmware version available:• Trimble R10, Trimble R10 LT• Trimble R8s• Trimble R8
- Model 2, 3, 4• Trimble R6
- Model 2, 3, 4• Trimble R4
- Model 2, 3• Trimble R2• Trimble R9s• Trimble R7 GNSS• Trimble NetR9 Geospatial
The Trimble DL application features include:• A free Android application for simple data logging setup and collection.• Static and Fast Static surveying styles.• Data file management from your Android phone or tablet.• Email raw data files from the field to the office.• GNSS satellite information that includes Skyplot of visible satellites.
Category : Productivity
Reviews (28)
Awesome except few issues. The application doesn't connect to the same receiver, after few hours. Asks for reinstalling to connect again. Help out Trimble!
Email data file, I was trying to send a base file of 8mb. Couldn't do after many attempts also. It is working for smaller files only.
Got a message "importing file failed" while was trying to send t02 file from R10. What i am doing wrong? NOMU S10 PRO Android 7.0
Great App. We just need it for iOS now but we all know Apple won't allow for that. ;)
Why my blutoth not connected, Im use Realme 2 Pro & Redmi Note 8 App say " unable to connect to R4 " like that
Using our R2 I have yet to be able to download the file via email, just hangs.
Why does this not work with SPS receivers? Why must Trimble make it so difficult!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Best app for STATIC survey
very useful tool
doesnt work with Trimble R8?
Excellent static session tool. Doesnt work with the HUAWEI MediaPad M3 8,4" doesnt connect with Bluetooth to an R8s receiver. Only needs to add support for RTK base start/close Recently I was at a senseFly eBee Plus RTK drone and they were using an R10 as the RTK base for the flying mission so they had to use an TSC3 with ACCESS to configure and start it and then do nothing with the data collector until after the drone landed and ended the survey and turned off the R10.... seems like a waster of the TSC3 when it should be a Trimble app to do this basic task for a drone project. Also it doesnt work with Spectra SP60/SP80 receivers
we need also survey with ppk not jus fast static and static
Its not working on my itel p12 I don't know why
Best App from Trimble family...Especially this app is best to use static survey....once static is completed...immediately observed raw data can be shared to office for processing ....Great....
Incredibly useful app! Works with R8s. Potentially confusing when working with multiple receivers because the UI always shows the last set of input parameters (eg pt. num., ant. ht.) even though other values update when you connect to different recivers; but, the parameter value ate written to the file at the start of session so it works correctly. Quick and easy to do a static shot and send the file to yourself.
Do not work with r4-2. Trimble dl cannot read pdop therefore cannot use trimble dl for r4-2
Another Great Tool From Trimble however would like to see R7/R8 Gen 1 added as supported equipment for OPUS observations. Confirmed with Samsung S5 & S6 Edge + and AT&T Rotary dial Phone.
Work fine on Android 4.4 . But bluetooth can't connect on Nexus7(2013) with Android 6.01
Just bought R10 base rover system, updated new firmware (5.14), cannot connect to any of the receivers. What I am doing wrong.
Been trying for two days to connect a Galaxy S7 with the R10... Firmware is 5.14 .
Android Bluetooth finds r8-2 but Trimble app will not show any receivers to connect to. Worked on notes 3. Please fix
Once receiver firmware was updated it works very well, no PDOP problems anymore. Would be great if you set a receiver to log, and be able to disconnect without stopping the session. Could then start another receiver to log. Better productivity
Best looking app on the store ;)
R10 sn 8175, nexus 6p, will not connect. System Bluetooth sees rover but Trimble app cannot. Any ideas
finally Trimble did it
if it just be able to control the recivers on ppk mode it would be fantastic
Thanks Trimble :)
Connected right up to my first receiver, have to close the app and reopen to connect to another. Also having an issue with one particular receiver that could just be the unit or maybe the app. Hard to tell how good it is after this first day, but so far not super impressed knowing the quality Trimble usually has.