Vape Tool Pro

Good app overall, happy that i got it. There is one huge bug though since its launch... When you rotate the screen and rotate it back, settings are messed up. This is so frustarating, phone screen will always tilt when you place it down and pick it. Happens with every complex coil and with e-liquids. The latter has messed up my percentages more than once. If this ever gets fixed permanently after all these years, i'll change my rating to 5 stars. Until then i advise caution when you mix

I like this app, actually better than steam engine. The free app is great for most folks. I upgraded as I planned to try some exotic Clapton type builds; that and I wanted to learn more about the sweet spot settings. It's kind of complicated but not nearly as much as steam engine. Good interface and seems to run well on my phone.

Great all in one app every camper vaper should take a look at. Has just about any calculator you'd need, and I really like the way it's layers out step-by-step when putting in wire for clapton and other "exotic" coil builds. The little social bit where you can share photos of your build is nice as well, and I find myself posting there more often than I thought I would.

It could be a lot better. One person said in a previous review that it works out the percentage when mixing juices but it doesn't. I think they meant its just like any other juice calculator that are free. The coil rapping tool is good but I paid for the pro version which really isn't worth the money I wish I hadn't bothered. When it says heat on the bottom I though it would give me the temperature for the temperature control option but it doesn't. Pro version not worth it.

Usually a great app but recently I cannot access my recipes tab. It force closes app every time I try to open the recipe list. Quick update: recipes and flavors both force close when clicking on the tabs. Only way to view my saved recipes is to create a new steeping timer and then close app, reopen, go to steeping and now I can view the measurements of my recipe.

calculator is a little fiddly, needs more options for wire shapes like braids and corrugated. the "cloud" needs a way to be more user regulated. overall the best calculator I've tried so far for coil building, the eliquid calculator has improved a bit over time. As of 19mar2020 the "share" button in the coil calculator no longer functions.

Very useful tool if a little inaccurate at times. I have been using this app for quite some time and have worked out it's quirks. For instance, I use 3mm coiling rods but have to set the vape tool to 2.996 to get more accurate results. Also I use the Coily Tool to cut my leg lengths accurately, but in the vape tool I have to increase the length by 1 mm. The final quirk is it doesn't allow adjustments for spaced verses contact coils. But I use it on every time to get a rough idea of my build.

I like his app and use it alot. However, I keep getting a notification saying it COULD be harmful for my device, yet I know it works just fine. It's happened several times before when this app was removed from Google Play Store a while back and has since returned. I just started getting these notifications again recently and it's rather annoying.

As a coil builder, I love this app! Very easy to use and helps me set up my coil builds, do calculations on wattage and coil performance. If you are a vaper and you also build coils, you absolutely need this app, well worth upgrading it as well. 👌 One of the absolute highlights about it, there are no annoying ads, even if you don't upgrade it! And it is super cheap to upgrade and worth it, will be using this app as long it exists.

I purchased Pro version. Later I realised that liquid mixture calculation is faulty. It showes wrong calculations. I tried to contact the app developer, but their email doesn't work. I left my message on their FB page, no response whatsoever after few days. The app itself looks very promissing. Unfortunatelly, there are some seroous issues. It doesn't produce right calculations, so what is a point of it? Support doesn't work. Well, no big money, no big deal but my advice is to avoid this app.

Fantastic app, doea it all. My feature is the coil build tool. It's extremely useful for determining how various claptons/fused claptons are going to perform. It gives surface area, heat capacity, watt range, all kinds of stuff. I went ahead and paid the $1.99 for the pro version because I found myself using it so much. Thanks for bringing a great vaping app to the market in a sea of highly flawed apps with a lack of features. Tbh I'd of paid more for this. 😃👌💯✌️🌠🔥⚡🙏💨❤️🤟🙌🤜

Amazing app and works well but I would love it if the coil calculator didn't reset every time my phone turned sideways. Also, can we get a battery spec converter that allows you to calculate what your mAh, minimum ohm, and amps are for dual, triple, and quad batteries in serial or parallel.

Use may features of this app regularly. 4 stars because nothing in the universe is perfect😉🙌. Could automatically save concentrates entered or give option to. Links to databases of individual concentrate brand and flavour data would be handy. Maybe a prize for the worst juice flavour created coz I reckon I've nailed it a few times🤣🤣

This is by far the best app I've used for coil calculations. The only thing that's and issue is that when my phone's screen flips, it resets everything. I still rate it at 5 stars.

I've reinstalled this app because it really is the best out there. I hope that was the first and last time Google pull it for dubious content because I had to frig about transferring all my recipes to another app, and now back again. If this goes wrong again that'll be it for me no more chances. You can have the other star back when I'm happy this wont happen again.

after i got yo grips with the interface i found the app to be excelent, very different to yhe ohms calculator ive used before. far more extensive than anything else my best friend when ut comes to info i need and its in my pocket ready yo use at the push of a button do not regret the £1.40 or whatever it was i spent on the app highly recomend it especially to builders !!!!

Glad to see this app back again after it was taken down. I've been using the pro version for years now and it's been invaluable for mixing liquids, storing recipes, managing flavour concentrates and testing new coil builds. Highly recommend this app to anyone working in a vape shop too, it's great for finding out the max amp draw for any batteries customers bring in. Amazing value for money, I can't recommend it enough to anyone that owns more than a basic vape setup.

I bought the pro version so.... Wouldn't spend money if it wasn't good. It's reliable and accurate. A must have if you're going to build any kind of coil OR make juice. It calculates juice, coils, and even has ohm law calculator. Can upload pics too. Save your recipes and favorite coils. All in one app. So you're darn right I bought pro. It unlocks the advanced features but best of all it supports the developers. I want this app to get even better. Thanks for an amazing tool.

**nice tool** wires can be saved but not edited or used sweet spot not suitable for mtl bases are no longer with Nic since TPD, needs to split calculation, mixer should be integrated and use prices also. why is glycerin separately there suddenly? for what. mix not saved, not used in next tab. lot of negative numbers in calcs. Blender receipt numbers wrong. confusing , should help more and provide quality instead of quantity of functions

amazing app. The second i had enough credit i got the pro version. this version is way more reliable and is definitely worth the money i paid i use this app all the time. the percentages foraking e liquid are accurate and the build calculator is spot on. i also like how this version helps to calculate concentrate measurements so you can make e liquid a lot quicker I highly recommend if your building your own coils and making your own e liquid

It's a great app.. sometimes im little concerned about the values I get in form of required wire turns to achieve a specific resistance.. I guess it may need little improvement there.

GREAT app, but i wish they would add some "special" wire options other then plain metals. for example Hotwirez wire is a alloy and there is no selection for that. hopefully it can be added in a update

Essential tool for those vapers who build their own coils. I can't even begin to tell you how much wire and aggravation I have saved myself with this app. Specific parameters = very accurate results bottom line. This also has all the necessary tools to help new builders out in a meaningful way. A++++

Only 4 stars bc im new to building and idk if what I got is different than show but cores and wraps don't line up all the time or it's telling me I have more wraps than I should. But if it matches it works perfectly!

A great app for builders and mixers alike. I make use of the pro version almost daily making different coils. The only things I would like to see is more coil build types although you can achieve most in custom. Deffently a must have for the DIY vapers!

I used to rate 5 stars but 2 things are annoying me more and more. Firstly: The coil calculator won't let you simply put the resistance (ohm/ft or ohm/m) of the composite wire in. Secondly: Murata took over Sony's Li-Ion battery division in 2017 yet you won't find any Murata batteries, there are still only Sony (who's looking for 3 year old batteries???) but then not even the VTC6A. Btw, same for the Samsung 40T.

Very nice tool but i wish it got periodic updates, like the batteries database. And not all build available like braided coil.