APRS TX

APRS TX allows licensed Ham Radio operators to beacon their position details to the APRS-IS network using the internet.

The following information is sent in each position packet:

* Latitude
* Longitude
* Speed
* Altitude
* Bearing
* Beacon message (22 characters max)
* APRS Symbol

Within the app you will need to specify your Callsign and Passcode. Pass codes are only available to licensed Ham Radio operators but can be easily found online.

Within the app you may change the following information:

* Callsign
* Passcode
* APRS-IS Server URL
* Beacon Message
* Beacon Time Interval
* APRS Symbol for choosing which icon will be displayed on APRS maps.

This app has been optimised for use on iOS iPhones 5/5s/6/6+/6s/6s+. You may also use this app on iPad devices but a continuous location will be required, normally through GSM or WiFi.

Please note: This app uses the GPS feature of your device. Continued use of this app may drain the device battery sooner.

Please email [email protected] if you have any feature requests or bug issues. If you leave feedback reporting an issue I have no way of communicating with you to resolve the issue.